Viper Brite

Viper Brite

Nothing cleans or foams better than Viper Brite. This highly aggressive non-acid, alkaline coil brightener is recommended for use on heavily soiled coils that have not been cleaned in years. A 10:1 dilution will provide abundant amounts of foaming power that will push debris out of deeply impacted coils. The alkaline effect strips hard oxidation from aluminum fins to restore the coil to a bright metallic shine. Please respect the power of this chemical and always wear full protective gear.

  • Non-Acid Formula
  • Coil Brightner
  • Concentrate
  • Approved For Use Around Food

SIZES: GALLON | DRUM

Download PDF

Big Blu

Big Blu

MICRO LEAK DETECTOR

The Original Big Blu leak detector is used by OEM’s and industry professionals worldwide. This is the only bubble solution capable of detecting gas leakage down to 0.65 ounces per year. Use on any gas including Oxygen.

  • NSF certified for use around food
  • Non-Corrosive
  • Detects Micro Leaks down to 0.65 oz/year
  • Safe of any type of gas


SIZE: QUART | GALLON | DRUM

Download PDF

Nylog Blu

Nylog Blu

GASKET & THREAD SEALANT

Nylog Blue is an elastic fluid made from synthetic refrigeration grade compressor oil. Nylog Blue is fully miscible and compatible with all system refrigerants and oils. Gaskets coated with Nylog will never dry or become heat fixed to the surface. Threaded connections coated with Nylog will block high pressure leaks by forming a hydraulic seal. Nylog can be used an assembly lube when installing shaft seals, o-rings, schraeder valves, ball valves, or other internal system components.

  • Will not Contaminate Systems
  • Seals Flares and Threaded Connections
  • Lubricates O-Rings and Gaskets
  • Approved by OEM Manufacturers

Download PDF

Nylog Red

Nylog Red

GASKET & THREAD SEALANT

Nylog Red is an elastic fluid made from synthetic refrigeration grade compressor oil. Nylog Red is fully miscible and compatible with mineral oil refrigerants and oils. Gaskets coated with Nylog will never dry or become heat fixed to the surface. Threaded connections coated with Nylog will block high pressure leaks by forming a hydraulic seal. Nylog can be used an assembly lube when installing shaft seals, o-rings, schraeder valves, ball valves, or other internal system components.

  • Will not Contaminate Systems
  • Seals Flares and Threaded Connections
  • Lubricates O-Rings and Gaskets
  • Approved by OEM Manufacturers

Download PDF

Wetrag

Wetrag

HEAT BLOCKING PUTTY

This reusable heat blocking putty keeps piping and sensitive components cooler than traditional wet rag applications during brazing, soldering, or welding. It is made from the same materials found in the heat shield of the space shuttle. Simply apply, remove, and reuse.

  • Reusable up to 40 Times
  • Withstands Temperatures over 2000 °F
  • Blocks Direct and Conductive Heat
  • Indicator Dye Fades as Product Wears Out

SIZE: 12 OZ

Download PDF

Coil Coating

Coil Coating

COIL COATING Viper Coil Coating is a permanent epoxy resin that we supply to factory OEM’S and coil manufacturers. It is the toughest and longest lasting coating you will ever use. It bonds to all metal surfaces and withstands temperatures to 400° F (205° C). The aerosol injector provides a flat spray pattern for reaching deep into the coil body. In the field, simply apply a single coat to the front and back of the coil. There will be no loss of heat transfer when used as directed.

  • Permanent Epoxy Resin Coating
  • Used by OEM's
  • No Heat Transfer Loss
  • Protects from Salt Water Damage

SIZES: 15 OZ

Download PDF

Get Associated With Us.